Hpp-enterprises 2740P Manual de usuario descargar pdf (Pagina 55)

Memory modules

Description Spare part number

1-GB (PC3-10600, 1333-MHz, DDR3) 598859-001

2-GB (PC3-10600, 1333-MHz, DDR3) 598856-001

4-GB (PC3-10600, 1333-MHz, DDR3) 599092-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 39).

5. Remove the hard drive cover (see

Hard drive on page 41).

Remove the memory module:

1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory

module. (The edge of the module opposite the slot rises away from the computer.)

2. Remove the memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the

memory module slot.

Reverse this procedure to install a memory module.

ENWW Component replacement procedures 47

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 116 117

Sin comentarios

Hpp-enterprises 2740P Manual de usuario Pagina 55